Thermo Scientific TSQ 8000 Evo Hardware Manual page 272

3
Advanced Troubleshooting
Replacing Components of the Electron Multiplier
246 TSQ 8000 Evo Hardware Manual
5. Use a T10 Torxhead screwdriver to remove the four screws holding the electrometer
board in place.
Figure 267. Removing the Electrometer Board
Screws
6. Remove the electrometer board to reveal the anode feedthrough.
Figure 268. Removing the Anode Feedthrough, O-ring, Standoff and Screws
Anode Feedthrough
and O-ring
Screws
Standoff
Thermo Scientific