Thermo Scientific TSQ 8000 Evo Hardware Manual page 415

Thermo Scientific
Figure 414. Removing the Controller Interface Board and PC Communication Board
PC Communication
Board
Controller
Interface Board
14. Remove the foreline gas tube from the CI reagent gas flow module.
15. Remove the 1/16 in. stainless steel tubing on the output connector of the CI reagent gas
flow module.
16. Use a T20 Torxhead screwdriver to detach the two screws holding the CI reagent gas flow
module to the chassis
Figure 415. Installing the CI Reagent Gas Flow Module
CI Output
Connector
Ethernet Cable
Screws
TSQ 8000 Evo Hardware Manual
4
Upgrade Equipment
CI Reagent Gas Flow Module
CI Reagent Gas
Flow Module
Foreline Gas
Tube
389