Thermo Scientific TSQ 8000 Evo Hardware Manual page 398

3
Advanced Troubleshooting
Replacing Fans and Filters
372 TSQ 8000 Evo Hardware Manual
Figure 398. Replacing the Turbo Cooling Fan
Turbo Cooling
Fan
20. Reconnect the turbo cooling fan cable to the distribution board.
21. Replace the fan plenum, chassis cooling fan, and air deflector assembly into the
instrument.
22. Reattach the six screws securing the fan plenum to the chassis.
23. Reconnect the cable on the chassis cooling fan to the distribution board.
24. Replace the lens driver board by aligning the connector on the bottom of the board with
the connectors on the distribution board beneath it. It will drop into the slot when it is in
the right position.
25. Push the lens driver board down into the connector.
Thermo Scientific