Thermo Scientific TSQ 8000 Evo Hardware Manual page 314

3
Advanced Troubleshooting
Replacing the Boards in the TSQ 8000 Evo Instrument
288 TSQ 8000 Evo Hardware Manual
Figure 308. Removing the Lens Driver Board
7. Use your fingers to pry the bracket of the board away from the chassis and toward the left
side of the instrument.
8. Remove the top manifold cover (glass) out of the top of the instrument and set it aside.
9. Open the front door of the TSQ 8000 Evo instrument.
10. Use a T20 Torxhead screwdriver to remove the four screws around the manifold door.
Note Remove the screws completely so that they do not scratch the manifold when you
close the door.
Lens Driver Board Screw
Thermo Scientific