Thermo Scientific TSQ 8000 Evo Hardware Manual page 193

Thermo Scientific
6. Slide the source interface board and the source block out from under the tray without
damaging or disconnecting the wires.
Figure 154. Removing the Ion Source from the Analyzer Tray
7. Remove and replace the source to ion guide spacer.
Figure 155. Replacing the Source to Ion Guide Spacer
Wires
Source to Ion
Guide Spacer
3
Advanced Troubleshooting
Replacing Components of the Ion Source
Source
Interface
Board
Source Block
TSQ 8000 Evo Hardware Manual 167