Thermo Scientific TSQ 8000 Evo Hardware Manual page 306

3
Advanced Troubleshooting
Replacing the Boards in the TSQ 8000 Evo Instrument
280 TSQ 8000 Evo Hardware Manual
Figure 300. Removing the Large Glass Manifold Covers
CAUTION - ELECTRICAL HAZARD Avoid dropping screws between chassis and side cover
or board. If you drop a screw, find it before powering the instrument on again.
11. Look into the instrument from the left side and use a T20 Torxhead screwdriver to
remove the three screws around the 4-pin feedthrough.
Figure 301. Removing the 4-pin Feedthroughs
Screws
Large Glass
Manifold Cover
Thermo Scientific