Start The Pattern Generator And View The Walking Ones Pattern - HP 1660 Series Training Manual

Using the Pattern Generator

Start the Pattern Generator and View the Walking Ones Pattern

Start the Pattern Generator and View the Walking
Ones Pattern
When you select Run and Repetitive, the Pattern Generator begins to run in
repetitive mode. The output is the repeating "walking ones" pattern. You will
not see this output until you switch to the timing analyzer waveform display.
The pattern generator will run independently until you stop it by pressing the
Stop key.
On the front panel of the logic analyzer, press the blue SHIFT key,
1
and then push the Run
Highlight the Patt Gen in the top-left corner of the screen, and press
2
the key. Choose
Select
Highlight the the field, and press the
Run
3
and press the key.
Select
The Timing analyzer runs a single trace and automatically displays the
Waveform 1 menu in which you see the "walking ones" patter.
Highlight the s/Div field.
4
Turn the knob until the
5
Starting the Pattern Generator and Viewing the Walking Ones Pattern
9-14
Get other manuals https://www.bkmanuals.com
key to run the pattern generator repetitively.
from the pop-up menu.
Analyzer
Select
field displays 20 ns.
s/Div
key. Choose ,
Single