Introduction; Initial Inspection; Preparation For Use; Power Requirements - HP 4262A Operating And Service Manual

Model 4262A
Section IT
Paragraphs 2-1 to 2-11
SECTION Il
INSTALLATION
2-1. INTRODUCTION.
2-3. INITIAL INSPECTION.
2-5. PREPARATION FOR USE.
2-6. POWER REQUIREMENTS.
WARNING
BEFORE TURNING THE 4262A
LINE SWITCH TO ON, VERIFY
THAT THE INSTRUMENT IS SET
TO THE VOLTAGE OF THE
POWER SUPPLIED.
CAUTION
USE PROPER FUSE FOR LINE
VOLTAGE SELECTED.
CAUTION
MAKE SURE THAT ONLY FUSES
FOR THE REQUIRED RATED
CURRENT
AND OF THE SPECI-
FIED TYPE ARE USED FOR RE-
PLACEMENT. THE USE OF
MENDED FUSES AND THE
SHORT-CIRCUITING
OF FUSE-
HOLDERS MUST BE AVOIDED.
2-10. POWER CABLE.
2-1