Jog Operation Using A Panel Operator - YASKAWA SGDV User Manual

5.3

JOG Operation Using a Panel Operator

This section describes the procedure for executing a JOG operation using a panel
operator.
The panel operator is located under the front cover of the SERVOPACK (analog
pulse models only).
Step Display after operation
Alternate
1
display
2
3
4
5

5.3 JOG Operation Using a Panel Operator

View with
front cover open
Panel operator
Keys
MODE/SET DATA/
MODE/SET DATA/
MODE/SET DATA/
MODE/SET DATA/
Operation
Turn ON the power to the SERVOPACK.
The forward run prohibited (P-OT) or
reverse run prohibited (N-OT) message is
displayed.
When the JOG operation is executed, P-
OT and N-OT are automatically disabled.
Press the MODE/SET Key to select the
utility function mode.
Press the Up ( ) or Down (
Key to select Fn002.
Press the DATA/SHIFT Key for approxi-
mately one second.
Press the MODE/SET Key.
The servomotor power will turn ON.
) Cursor
5
5-5