Software Version Display (Fn012) - YASKAWA JUSP-MD D01A Series User Manual

7 Utility Functions (Fn)

7.12 Software Version Display (Fn012)

Select Fn012 to check the multi-winding drive unit and encoder software version numbers.
(1) Preparation
There are no tasks that must be performed before the execution.
(2) Operating Procedure
Use the following procedure.
Step
1
2
3
4
5
7-22
Display after
Operation
MODE/SET
MODE/SET
MODE/SET
MODE/SET
MODE/SET
Keys
Press the MODE/SET Key to select the utility function.
DATA/
Press the UP or DOWN Key to select Fn012.
DATA/
Press the DATA/SHIFT Key for approximately one second
to display the multi-winding drive unit software version
number.
DATA/
Press the MODE/SET Key to display the encoder software
version number.
Note: If the MODE/SET Key is pressed again, a pre-pro-
grammed display will appear. The display will
DATA/
change as follows: 0.0000 → S.FFFF → F.FFFF.
Press the DATA/SHIFT Key for approximately one second.
"Fn012" is displayed again.
DATA/
Operation