Show Mvr Interface - Dell N1100-ON Reference Manual

Message Type
Successful Completion Message
Error Completion Message
The following table explains the output parameters.
Parameter
MVR Group IP
Status
Members
Examples
console#show mvr members
MVR Group IP
------------------
224.1.1.1
console#show mvr members 224.1.1.1
MVR Group IP
------------------
224.1.1.1

show mvr interface

Use the show mvr interface command to display the MVR enabled interfaces
configuration.
Syntax
show mvr interface [interface-id [members [vlan vlan-id]]]
• interface-id—Identifies a specific interface.
• vlan-id—VLAN identifier.
Default Configuration
This command has no default configuration.
Message Description
None
MVR disabled
Description
MVR group multicast IP address.
The status of the specific MVR group. It can
be active or inactive.
The list of ports which participates in the
specific MVR group.
Status
---------------
INACTIVE
Status
---------------
INACTIVE
Members
---------------------
Gi1/0/1, Gi1/0/2, Gi1/0/3
Members
---------------------
Gi1/0/1, Gi1/0/2, Gi1/0/3
Layer 2 Switching Commands
614