Show Gvrp Error-Statistics - Dell N1100-ON Reference Manual

Gi1/0/11 20
Gi1/0/12 20
Gi1/0/13 20
Gi1/0/14 20

show gvrp error-statistics

Use the show gvrp error-statistics command in User Exec mode to display
GVRP error statistics.
Syntax
show gvrp error-statistics [interface-id]
• interface-id—An Ethernet interface identifier or a port channel interface
identifier.
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
If no interface-id parameter is given, all interfaces are shown.
Example
The following example displays GVRP error statistics information.
console>show gvrp error-statistics
GVRP error statistics:
----------------
Legend:
INVPROT: Invalid Protocol Id
INVALEN: Invalid Attribute Length INVAVAL: Invalid Attribute Value
INVEVENT: Invalid Event
Port INVPROT INVATYP
---- ------- -------
60 1000
60 1000
60 1000
60 1000
INVATYP: Invalid Attribute Type
INVAVAL INVALEN
------- -------
Layer 2 Switching Commands
Disabled
Disabled
Disabled
Disabled
INVEVENT
--------
464