Show Captive-Portal Interface Configuration Status - Dell N1100-ON Reference Manual

Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal interface client status
Intf
------ ----------------------------------- ----------------- ---------------
Gi1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit
Gi1/0/2 Unit: 1 Slot: 0 Port: 2 Gigabit
Gi1/0/3 Unit: 1 Slot: 0 Port: 3 Gigabit
console#show captive-portal interface gi1/0/1 client status
Interface................................. Gi1/0/1
Interface Description..................... Unit: 1 Slot: 0 Port: 1 Gigabit
Client
MAC Address
----------------- --------------- ----- ----------------- -------- ---------
0002.BC00.1290
0002.BC00.1291
Captive Portal Interface Commands
show captive-portal interface configuration
status
Use the show captive-portal interface configuration status command to
display the interface to configuration assignments for all captive portal
configurations or for a specific configuration.
Syntax
show captive-portal interface configuration [cp-id] status
• cp-id — Captive Portal ID.
Intf Description
Client
IP Address CP ID
10.254.96.47
10.254.96.48
Client
MAC Address
0002.BC00.1290
0002.BC00.1291
0002.BC00.1292
0002.BC00.1293
CP Name
1 cp1
2 cp2
Security Commands
Client
IP Address
10.254.96.47
10.254.96.48
10.254.96.49
10.254.96.50
Protocol Verification
http local
http local
1008