Dell N1100-ON Reference Manual page 139

RADIUS
Command
acct-port
attribute 6
attribute 8
attribute 25
attribute 31
authentication event fail
retry
auth-port
deadtime
key
msgauth
name (RADIUS server)
Description
Sets the port that connects to the RADIUS
accounting server.
Configures the switch to send the RADIUS
Service-Type attribute in the Access-Request
message sent to a specific RADIUS
authentication server.
Configures the switch to send the RADIUS
Framed-IP-Address attribute in the Access-
Request message sent to a specific RADIUS
authentication server.
Enables the switch to send the RADIUS Class
attribute as supplied by the RADIUS server in
accounting messages sent to the specific
accounting server.
Alters the format of the MAC address sent in
the Calling-Station-Id attribute to the RADIUS
server when authenticating using 802.1X MAC
based authentication for an interface.
Sets the number of times authentication may
be reattempted by the user for the RADIUS
method for an IEEE 802.1X supplicant.
Sets the port number for authentication requests
of the designated radius server.
Improves Radius response times when a server is
unavailable by causing the unavailable server to
be skipped.
Sets the authentication and encryption key for all
RADIUS communications between the switch
and the RADIUS daemon.
Enables the message authenticator attribute to
be used for the RADIUS Authenticating server
being configured.
Assigns a name to a RADIUS server.
Dell EMC Networking CLI
a
Mode
R
R
R
R
R
GC
R
R
R
R
R
139