Loop Protection - Dell N1100-ON Reference Manual

Command
show lldp med interface
show lldp med local-device
detail
show lldp med remote-
device
show lldp remote-device
show lldp statistics
a. For the meaning of each Mode abbreviation, see

Loop Protection

Command
keepalive (Interface Config)
keepalive (Global Config)
keepalive action
show keepalive
show keepalive statistics
a. For the meaning of each Mode abbreviation, see
MLAG
Command
clear vpc statistics
feature vpc
Description
Displays a summary of the current LLDP MED
configuration for a specific interface.
Displays the advertised LLDP local data in
detail.
Displays the current LLDP MED remote data. PE
Displays the current LLDP remote data.
Displays the current LLDP traffic statistics.
Mode
Description
Enables loop protection on an interface.
Globally enable loop protection and
optionally configure the loop protection
timer and packet count.
Configure the action taken when a loop is
detected on an interface.
Displays the global loop protect
configuration.
Displays the loop protect status for one or all
interfaces.
Mode
Description
Clears the counters for the keepalive
messages transmitted and received by the
MLAG switch.
Enables debug traces for the specified
protocols.
Types.
Types.
Dell EMC Networking CLI
a
Mode
PE
PE
PE
PE
a
Mode
IC
GC
IC
PE
PE
a
Mode
PE
GC
121