Table of Contents
Advertisement
Command
network
next-server
option
service dhcp
sntp
show ip dhcp binding
show ip dhcp conflict
show ip dhcp global
configuration
show ip dhcp pool
show ip dhcp server statistics
a.
For the meaning of each Mode abbreviation, see
DHCPv6
Command
clear ipv6 dhcp
dns-server (IPv6 DHCP Pool
Config)
domain-name (IPv6 DHCP
Pool Config)
ipv6 dhcp pool
ipv6 dhcp relay
Description
Defines a pool of IPv4 addresses for distributing
to clients.
Sets the IPv4 address of the TFTP server to be
used during auto-install.
Supplies arbitrary configuration information to
a DHCP client.
Enables local IPv4 DHCP server on the switch. GC
Sets the IPv4 address of the NTP server to be
used for time synchronization of the client.
Displays the configured DHCP bindings.
Displays DHCP address conflicts for all relevant
interfaces or a specified interface.
Displays the DHCP global configuration.
Displays the configured DHCP pool or pools.
Displays the DHCP server binding and message
counters.
Mode
Description
Clears DHCPv6 statistics for all interfaces or for
a specific interface.
Sets the IPv6 DNS server address which is
provided to a DHCPv6 client by the DHCPv6
server.
Sets the DNS domain name which is provided
to a DHCPv6 client by the DHCPv6 server.
Enters IPv6 DHCP Pool Configuration mode.
Configures an interface for DHCPv6 Relay
functionality.
Types.
Dell EMC Networking CLI
a
Mode
DP
DP
DP
DP
PE
PE
PE
UE or
PE
PE
a
Mode
PE
v6DP
v6DP
GC
IC
168
Advertisement
Table of Contents
