Dell N1100-ON Reference Manual page 309

This information is shown if only an interface parameter is given:
Field
Interface Identifier
Status
Max-dynamic
Max-static
Protect
Frequency
Shutdown
Sticky Mode
This information is shown if the dynamic parameter is given:
Field
Dynamically Learned
MAC Address
VLAN ID
This information is shown if the static parameter is given:
Field
Statically Configured
MAC Address
VLAN ID
Sticky
This information is shown if the violation parameter is given:
Description
The interface identifier.
The port security administrative status
(enabled/disabled).
The dynamic MAC address limit.
The static address limit.
Trap issued on violation (enabled/disabled).
The frequency of trap issuance (in seconds).
Shut down (err-disable) interface on violation
(enabled/disabled).
Sticky mode configuration (enabled/disabled).
Description
Dynamically learned MAC addresses.
The VLAN on which the MAC address is learned.
Description
Statically configured MAC addresses.
The VLAN identifier of the MAC address.
Indicates if the secure MAC address is sticky.
Layer 2 Switching Commands
309