Locale - Dell N1100-ON Reference Manual

Default Configuration
No interfaces are associated with a configuration by default.
Command Mode
Captive Portal Instance Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-cp 2)#interface gi1/0/2

locale

The locale command is not intended to be a user command. The
administrator must use the Web UI to create and customize captive portal
web content. This command is primarily used by the show running-config
command and process as it provides the ability to save and restore
configurations using a text based format.
Syntax
locale web-id
• web-id — The locale number (Range: 1–3)
Default Configuration
Locale 1 is configured by default.
Command Mode
Captive Portal Instance mode.
User Guidelines
Captive Portal supports 3 locales per configuration.
1000
Security Commands