Dell N1100-ON Reference Manual page 740

Spanning Tree: Enabled
Mode: mstp Portfast BPDU Filtering: Disabled
CST Regional Root:
Regional Root Path Cost:
###### MST 2 Vlan Mapped:
ROOT ID
Priority
Address
Path Cost
Root Port
Bridge ID
Priority
Address
Hello Time: 2s Max Age: 20s Forward Delay: 15s Transmit Hold
Count: 6s
Name State
--------- -------- --------- --------- ---- ----- --------------
Gi1/0/1 Enabled
Gi1/0/2 Enabled
Gi1/0/3 Enabled
Gi1/0/4 Enabled
Gi1/0/5 Enabled
Gi1/0/6 Enabled
Gi1/0/7 Enabled
Gi1/0/8 Enabled
This example shows spanning-tree configured in rstp mode. Output is shown
for each interface.
console(config)#show spanning-tree active
Spanning Tree: Enabled
Mode: rstp Portfast BPDU Filtering: Disabled
CST Regional Root:
Regional Root Path Cost:
###### MST 0 Vlan Mapped:
ROOT ID
Priority
Address
This Switch is the Root.
Hello Time: 2s Max Age: 20s Forward Delay: 15s
Interfaces
Name State
--------- -------- --------- --------- ---- ----- --------------
Gi1/0/1 Enabled
BPDU Flooding: Disabled
80:00:00:1E:C9:DE:D4:47
0
3-5
4096
001E.C9DE.D447
0
4096
001E.C9DE.D447
Prio.Nbr Cost
128.1 0
128.2 0
128.3 0
128.4 0
128.5 0
128.6 0
128.7 0
128.8 0
(BPDU Flooding: Disabled)
80:00:00:1E:C9:DE:D4:47
0
1-10
32768
001E.C9DE.D447
Prio.Nbr Cost
128.1 20000
Sts Role RestrictedPort
FWD Desg No
FWD Desg No
DIS Disb No
DIS Disb No
DIS Disb No
DIS Disb No
DIS Disb No
DIS Disb No
Sts Role RestrictedPort
FWD Desg No
Layer 2 Switching Commands
740