Dell N1100-ON Reference Manual page 126

Command
drop
mark cos
mark ip-dscp
mark ip-precedence
match class-map
match cos
match destination-address
mac
match dstip
match dstip6
match dstl4port
match ethertype
match ip6flowlbl
Description
Use the drop policy-class-map configuration
command to specify that all packets for the
associated traffic stream are to be dropped at
ingress.
Marks all packets for the associated traffic
stream with the specified class of service value
in the priority field of the 802.1p header.
Marks all packets for the associated traffic
stream with the specified IP DSCP value.
Marks all packets for the associated traffic
stream with the specified IP precedence value.
Adds add to the specified class definition the
set of match conditions defined for another
class.
Adds to the specified class definition a match
condition for the Class of Service value.
Adds to the specified class definition a match
condition based on the destination MAC
address of a packet.
Adds to the specified class definition a match
condition based on the destination IP address
of a packet.
Adds to the specified class definition a match
condition based on the destination IPv6
address of a packet.
Adds to the specified class definition a match
condition based on the destination layer 4 port
of a packet using a single keyword, or a numeric
notation.
Adds to the specified class definition a match
condition based on the value of the ethertype.
Adds to the specified class definition a match
condition based on the IPv6 flow label of a
packet.
Dell EMC Networking CLI
a
Mode
PCMC
PCMC
PCMC
PCMC
CMC
CMC
CMC
CMC
v6CMC
CMC
CMC
v6CMC
126