Dell N1100-ON Reference Manual page 128

Command
police-two-rate
policy-map
random-detect queue-
parms
random-detect exponential-
weighting-constant
redirect
service-policy
show class-map
show classofservice dot1p-
mapping
show classofservice ip-dscp-
mapping
show classofservice trust
show diffserv
show diffserv service
interface
show diffserv service brief
show interfaces cos-queue
Description
Implements a two-rate Three Color Marker
(trTCM) per RFC 2698.
Establishes a new DiffServ policy or enters
policy map configuration mode.
Configures the green, yellow and red TCP and
non-TCP packet minimum and maximum
thresholds and corresponding drop
probabilities on an interface or all interfaces.
Configures the decay in the calculation of the
average queue size user for WRED on an
interface or all interfaces.
Specifies that all incoming packets for the
associated traffic stream are redirected to a
specific egress interface (Ethernet port or port-
channel).
Attaches a policy to an interface in a particular
direction.
Displays all configuration information for the
specified class.
Displays the current 802.1p priority mapping
to internal traffic classes for a specific interface.
Displays the current IP DSCP mapping to
internal traffic classes for a specific interface.
Displays the current trust mode setting for a
specific interface.
Displays the DiffServ General Status
information.
Displays policy service information for the
specified interface and direction.
Displays all interfaces in the system to which a
DiffServ policy has been attached.
Displays the class-of-service queue
configuration for the specified interface.
Dell EMC Networking CLI
a
Mode
PCMC
GC
GC, IC,
or IR
GC, IC,
or IR
PCMC
GC or
IC
PE
PE
PE
PE
PE
PE
PE
PE
128