Dell N1100-ON Reference Manual page 122

Command
feature vpc
peer detection enable
peer detection interval
peer-keepalive destination
peer-keepalive enable
peer-keepalive timeout
role priority
show vpc
show vpc brief
show vpc consistency-
parameters
show vpc consistency-
features
show vpc peer-keepalive
show vpc role
show vpc statistics
Description
Globally enables MLAG.
Enables the Dual Control Plane
Detection Protocol.
Configures the peer detection
transmission interval and the detection
interval.
Enables the Dual Control Plane Detection
Protocol with the configured IP address of
the peer MLAG, the local source address and
the peer timeout value.
Enables the peer keepalive protocol.
Configures the peer keepalive timeout value,
in seconds.
Configures the priority value used on a
switch for primary/secondary role selection.
Displays information about an MLAG.
Displays the MLAG global status.
Displays MLAG-related configuration
information in a format suitable for
comparison with the other MLAG peer.
Displays MLAG-related configuration
information in a format suitable for
comparison with the other MLAG peer.
Displays the peer MLAG switch's IP address
used by the dual control plane detection
protocol.
Displays information about the keepalive
status, keepalive parameters, role of the
MLAG switch, and the system MAC and
priority.
Displays counters for the keepalive messages
transmitted and received by the MLAG
switch
Dell EMC Networking CLI
a
Mode
GC
MD
MD
MD
MD
MD
MD
PE
PE
PE
PE
PE
PE
PE
122