Table of Contents
Advertisement
User Guidelines
The optional ex-pse (extended PSE) and ex-pd (extended PD) parameters are
only available on PoE capable switches.
Default Value
By default, the capabilities and network policy TLVs are included in LLDP
packets sent on interfaces enabled for MED. On PoE capable switches, the
extended PD TLV and extended PSE TLV are transmitted.
Example
console(config)#interface gigabitethernet 1/0/1
console(config-if-Gi1/0/1)#lldp med transmit-tlv capabilities
console(config-if-Gi1/0/1)#lldp med transmit-tlv network-policies
lldp notification
Use the lldp notification command in Interface Configuration mode to
enable remote data change notifications. To disable notifications, use the no
form of this command.
Syntax
lldp notification
no lldp notification
Default Configuration
By default, notifications are disabled on all supported interfaces.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to enable remote data change
notifications.
555
Layer 2 Switching Commands
Advertisement
Table of Contents
