Dell N1100-ON Reference Manual page 167

Command
bootfile
clear ip dhcp binding
clear ip dhcp conflict
client-identifier
client-name
default-router
dns-server (IP DHCP Pool
Config)
domain-name (IP DHCP
Pool Config)
hardware-address
host
ip dhcp bootp automatic
ip dhcp conflict logging
ip dhcp excluded-address
ip dhcp ping packets
lease
netbios-name-server
netbios-node-type
Description
Sets the name of the image for the DHCP
client to load.
Removes automatic DHCP server bindings.
Removes DHCP server address conflicts.
Identifies a a Microsoft
manually assigned an address.
Specifies the host name of a DHCP client.
Sets the IPv4 address of one or more routers for
the DHCP client to use.
Sets the IPv4 DNS server address which is
provided to a DHCP client by the DHCP server.
Sets the DNS domain name which is provided
to a DHCP client by the DHCP server.
Specifies the MAC address of a client to be
manually assigned an address.
Specifies a manual binding for a DHCP client
host.
Enables automatic BOOTP address
assignments.
Enables DHCP address conflict detection.
Excludes one or more DHCP addresses from
automatic assignment.
Configures the number of pings sent to detect if
an address is in use prior to assigning an address
from the DHCP pool.
Sets the period for which a dynamically
assigned DHCP address is valid.
Configures the IPv4 address of the Windows
Internet Naming Service (WINS) for a
Microsoft DHCP client.
Sets the NetBIOS node type for a Microsoft
DHCP client.
DHCP client to be
®
Dell EMC Networking CLI
a
Mode
DP
PE
PE
DP
DP
DP
DP
DP
DP
DP
GC
GC
GC
GC
DP
DP
®
DP
167