Table of Contents
Advertisement
Configured VPC system priority..................32767
Operational VPC system priority.................32767
Local System MAC..................................... 00:10:18:82:18:63
Timeout........................................ 5
VPC State...................................... Primary
VPC Role....................................... Primary
Peer
----
VPC Domain ID.................................. 1
Role Priority.................................. 100
Configured VPC MAC..............................<AA:BB:CC:DD:EE:FF>
Operational VPC MAC.............................<AA:BB:CC:DD:EE:FF>
Configured VPC system priority..................32767
Operational VPC system priority.................32767
Role............................................Secondary
Local System MAC................................00:10:18:82:1b:ab
show vpc statistics
Use the show vpc statistics command to display the counters for the keepalive
messages transmitted and received by the MLAG switch.
Syntax
show vpc statistics {peer-keepalive | peer-link}
Default Configuration
There is no default configuration for this command.
Command Modes
Privileged Exec mode and above
User Guidelines
There are no user guidelines for this command.
Example
(console)# show vpc statistics peer-keepalive
Total transmitted.......................................123
Tx successful...........................................118
Tx errors...............................................5
596
Layer 2 Switching Commands
Advertisement
Table of Contents
