Dell N1100-ON Reference Manual page 153

Command
dot1as pdelay-threshold
dot1as interval pdelay-loss
show dot1as
show dot1as statistics
a. For the meaning of each Mode abbreviation, see
Data Center Commands
Data Center Bridging
Command
datacenter-bridging
lldp dcbx version
lldp tlv-select dcbxp (dcb
enable)
lldp dcbx port-role
show lldp tlv-select
Description
Configures the propagation delay threshold in
nanoseconds, above which an interface is not
considered capable of participating in the
802.1AS protocol.
Configures the number of Pdelay_Req messages
for which a valid response has not been
received, above which a port is considered to
not be exchanging peer delay messages with its
neighbor.
Displays the IEEE 802.1AS configuration for
an interface or globally.
Displays the IEEE 802.1AS statistics for an
interface.
Mode
Description
Enables an Ethernet interface to enter
DataCenterBridging mode.
Configures the administrative version for the
Data Center Bridging Capability Exchange
(DCBX) protocol.
Enables the LLDP to send DCBX TLVs, if
LLDP is enabled to transmit on the given
interface.
Configures the port role to manual, auto-
upstream, auto-downstream and configuration
source.
Displays the Traffic Class to Traffic Class Group
mapping.
Types.
Dell EMC Networking CLI
a
Mode
IC
IC
PE
PE
a
Mode
IC
GC
GC or
IC
IC
PE
153