Dell N1100-ON Reference Manual page 170

Command
ipv6 dhcp snooping limit
ipv6 dhcp snooping log-
invalid
ipv6 dhcp snooping trust
ipv6 dhcp snooping verify
mac-address
ipv6 verify binding
ipv6 verify source
show ipv6 dhcp snooping
show ipv6 dhcp snooping
binding
show ipv6 dhcp snooping
database
show ipv6 dhcp snooping
statistics
show ipv6 source binding
show ipv6 verify
show ipv6 verify source
a. For the meaning of each Mode abbreviation, see
Description
Configures an interface to disable itself if the
rate of received DHCP messages exceeds the
configured limit.
Configures the port to log invalid received
DHCP messages.
Configures the port as trusted.
Enables the additional verification of the source
MAC address with the client hardware address
in the received DHCP message.
Configures a static IP source guard binding.
Configures an interface to filter incoming
traffic from sources that are not present in the
DHCP binding database.
Displays the IPv6 DHCP snooping
configuration.
Displays the IPv6 DHCP snooping
configuration.
Displays IPv6 DHCP snooping configurations
related to database persistency.
Displays IPv6 DHCP snooping filtration
statistics.
Displays the IPv6 source guard configurations
on all ports, an individual port, or on a VLAN.
Displays the IPv6 Source Guard configuration
on all interfaces or the specified interface.
Displays the Ipv6 source guard configurations
on all ports.
Mode Types.
Dell EMC Networking CLI
a
Mode
IC
IC
IC
GC
GC
IC
UE or
PE
UE or
PE
UE or
PE
UE or
PE
UE or
PE
UE or
PE
UE or
PE
170