Table of Contents
Advertisement
Command Mode
User Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
The following table describes the fields shown in the display:
Field
InOctets
InUcastPkts
InMcastPkts
InBcastPkts
OutOctets
OutUcastPkts
OutMcastPkts
OutBcastPkts
Alignment Errors
FCS Errors
Single Collision Frames Counted frames that are involved in a single collision, and
Multiple Collision
Frames
Late Collisions
Excessive Collisions
Received packets
dropped > MTU
Transmitted oversized
packets
Description
Counted received octets.
Counted received Unicast packets.
Counted received Multicast packets.
Counted received Broadcast packets.
Counted transmitted octets.
Counted transmitted Unicast packets.
Counted transmitted Multicast packets.
Counted transmitted Broadcast packets.
A count of frames received that are not an integral number
of octets in length and do not pass the FCS check.
Counted frames received that are an integral number of
octets in length but do not pass the FCS check.
are subsequently transmitted successfully.
A count of frames that are involved in a multiple collision,
and are subsequently transmitted successfully
Counted times that a collision is detected later than one
slot time into the transmission of a packet.
Counted frames for which transmission fails due to
excessive collisions.
Count of received frames dropped due to frame length
greater than the configured MTU.
Count of frames transmission > 1518 octets.
Layer 2 Switching Commands
400
Advertisement
Table of Contents
