Table of Contents
Advertisement
Default Configuration
The default 802.1p mapping is as follows:
User Priority
0
1
2
3
4
5
6
7
Command Mode
Global Configuration or Interface Configuration (Ethernet, Port-channel)
mode
User Guidelines
None
Example
The following example globally configures a mapping for user priority 1 and
traffic class 2. If trust mode is enabled for 802.1p (classofservice trust dot1p),
packets received on any interface marked with IEEE 802.1p priority 1 will be
assigned to internal CoS queue 2.
console(config)#classofservice dot1p-mapping 1 2
classofservice ip-dscp-mapping
Use the classofservice ip-dscp-mapping command in Global Configuration
mode to map an IP DSCP value to an internal traffic class. Use the no form of
the command to return the classofservice mapping to the default, and remove
a traffic class mapping for an IP DSCP value.
Traffic Class
1
0
0
1
2
2
3
3
Layer 2 Switching Commands
665
Advertisement
Table of Contents
