Dell N1100-ON Reference Manual page 120

LLDP
Command
clear lldp remote-data
clear lldp statistics
dcb enable
lldp med
lldp med confignotification
lldp med
faststartrepeatcount
lldp med transmit-tlv
lldp notification
lldp notification-interval
lldp receive
lldp timers
lldp transmit
lldp transmit-mgmt
lldp transmit-tlv
show lldp
show lldp interface
show lldp local-device
show lldp med
Description
Deletes all data from the remote data table.
Resets all LLDP statistics.
Enables the sending of DCBX information in
LLDP frames.
Enables/disables LLDP-MED on an interface.
Enables sending the topology change
notification.
Sets the value of the fast start repeat count.
Specifies which optional TLVs in the LLDP
MED set are transmitted in the LLDPDUs.
Enables remote data change notifications.
Limits how frequently remote data change
notifications are sent.
Enables the LLDP receive capability.
Sets the timing parameters for local data
transmission on ports enabled for LLDP.
Enables the LLDP advertise capability.
Specifies that transmission of the local system
management address information in the
LLDPDUs is included.
Specifies which optional TLVs in the 802.1AB
basic management set will be transmitted in the
LLDPDUs.
Displays the current LLDP configuration
summary.
Displays the current LLDP interface state.
Displays the LLDP local data.
Displays a summary of the current LLDP MED
configuration.
Dell EMC Networking CLI
a
Mode
PE
PE
GC
IC
IC
GC
IC
IC
GC
IC
GC
IC
IC
IC
PE
PE
PE
PE
120