Dell N1100-ON Reference Manual page 206

Command
ip http timeout-policy
show debugging
show supported mibs
show supported mibs
snapshot bgp
write core
a. For the meaning of each Mode abbreviation, see
sFlow
Command
sflow destination
sflow polling
sflow polling (Interface
Mode)
sflow sampling
sflow sampling (Interface
Mode)
sflow source-interface
show sflow agent
show sflow destination
Description
Configures the timeout policy for closing HTTP
and HTTPS sessions to the local HTTP server.
Displays packet tracing configurations.
Displays the HTTP server status and
configuration.
Displays the implemented SNMP MIBs.
Dumps a set of BGP debug information to
capture the current state of BGP.
Generates a core file on demand and either,
reboots the switch or tests the core file
configuration.
Mode
Description
Configures sFlow collector parameters (owner
string, receiver timeout, ip address, and port).
Enables a new sflow poller instance for the data
source if rcvr_idx is valid.
Enable a new sflow poller instance for this data
source if rcvr_idx is valid.
Enables a new sflow sampler instance for this
data source if rcvr_idx is valid.
Enables a new sflow sampler instance for this
data source if rcvr_idx is valid.
Selects the interface from which to use the IP
address inserted in the source IP address field of
transmitted sFlow packets.
Displays the sflow agent information.
Displays all the configuration information
related to the sFlow receivers.
Types.
Dell EMC Networking CLI
a
Mode
GC
PE
PE,
GC
PE,
GC
S
PE
a
Mode
GC
GC
IC
GC
IC
GC
PE
PE
206