Feature Vpc - Dell N1100-ON Reference Manual

Default Configuration
There is no default configuration for this command.
Command Modes
Privileged Exec mode
User Guidelines
There are no user guidelines for this command.
Example
console#clear vpc statistics

feature vpc

The feature vpc command globally enables MLAG. Use the no form of the
command to globally disable MLAG.
Syntax
feature vpc
no feature vpc
Default Configuration
By default, the MLAG feature is not globally enabled.
Command Modes
Global Configuration mode
User Guidelines
The MLAG configuration is retained even when the feature is disabled. The
peer link will not be enabled if the VPC feature is not enabled.
MLAG role election occurs if the MLAG feature is enabled and the keepalive
state machine is enabled.
Example
console#configure terminal
console(config)#feature vpc
581
Layer 2 Switching Commands