Show Captive-Portal Interface Client Status - Dell N1100-ON Reference Manual

Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration client status
CP ID CP Name
----- --------------- ------------------ ----------------- ---------
1 cp1
2 cp2
3 cp3
console#show captive-portal configuration 1 client status
CP ID..................................... 1
CP Name................................... cp1
Client
MAC Address
-------------- --------------- --------- --------------------------------
0002.BC00.1290 10.254.96.47
0002.BC00.1291 10.254.96.48

show captive-portal interface client status

Use the show captive-portal interface client status command to display
information about clients authenticated on all interfaces or a specific
interface.
Syntax
show captive-portal interface {gigabitethernet unit/slot/port|
tengigabitethernet unit/slot/port | fortygigabitethernet unit/slot/port} client
status
Default Configuration
There is no default configuration for this command.
Client MAC Address Client IP Address Interface
0002.BC00.1290
0002.BC00.1291
0002.BC00.1292
0002.BC00.1293
Client
IP Address Interface
Gi1/0/1
Gi1/0/2
10.254.96.47
10.254.96.48
10.254.96.49
10.254.96.50
Interface Description
Unit: 1 Slot: 0 Port: 1 Gigabit
Unit: 1 Slot: 0 Port: 2 Gigabit
Security Commands
Gi1/0/1
Gi1/0/2
Gi1/0/3
Gi1/0/4
1007