Show Ipv6 Mld Snooping Mrouter - Dell N1100-ON Reference Manual

Default configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
This user guideline applies to all switch models.To see the full Multicast
address table (including static addresses) use the
multicast command.
Example
This example shows MLDv2 snooping entries
console#show ipv6 mld snooping groups
Vlan Group
---- -----------------------
1 3333.0000.0003
MLD SSM Entries :
-----------------
VLAN Group
---- ---------------- ---------------- --------- ---------- ----------------
1 ff1e:2222:2222:
2222:2222:2222:
2222:2222

show ipv6 mld snooping mrouter

Use the show ipv6 mld snooping mrouter command to display information
on dynamically learned Multicast router interfaces.
Syntax
show ipv6 mld snooping mrouter
Type
-------
Dynamic
Reporter
fe80::200:3ff:f
e00:b00
show mac address-table
OIFs
------------------------------------
Te1/0/1,Te1/0/17
Filter IIF
include Te1/0/1
Layer 2 Switching Commands
Source Address
2001::2
519