Dell N1100-ON Reference Manual page 163

Command
route-target
set extcommunity rt
set extcommunity soo
show bgp ipv6
show bgp ipv6 aggregate-
address
show bgp ipv6 community
show bgp ipv6 community-
list
show bgp ipv6 listen range
show bgp ipv6 neighbors
show bgp ipv6 neighbors
advertised-routes
show bgp ipv6 neighbors
policy
show bgp ipv6 neighbors
received-routes
show bgp ipv6 statistics
show bgp ipv6 summary
Description
Creates a list of export, import, or both route
target (RT) extended communities for the
specified VRF instance.
Sets BGP extended community attributes for
the route target.
Sets BGP extended community attributes for
the site of origin.
Displays IPv6 routes in the BGP routing table.
Displays the configured IPv6 aggregate
addresses and indicates if each address is
currently active.
Displays the IPv6 routes that belong to the
specified set of communities.
Displays the IPv6 routes that match a specified
community list.
Displays information about IPv6 BGP listen
ranges.
Displays neighbors with IPv4 or IPv6 peer
addresses that are enabled for the exchange of
IPv6 prefixes.
Displays IPv6 routes advertised to a specific
neighbor.
Displays the inbound and outbound IPv6
policies configured for a specific peer.
Displays a list of IPv6 routes received from a
specific neighbor.
Displays statistics for the IPv6 decision process. UE,
Displays a summary of BGP configuration and
status.
Dell EMC Networking CLI
a
Mode
PE
RMC
RMC
UE,
PE,
GC
PE
PE
PE
PE
PE
PE
PE
PE
PE,
GC
UE,
PE,
GC
163