Table of Contents
Advertisement
•
group-id — The protocol-based VLAN group ID, which is automatically
generated when you create a protocol-based VLAN group with the vlan
protocol group command. To see the group ID associated with the name
of a protocol group, use the show port protocol all command.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the removal of the protocol-based VLAN
group identified as "2."
console(config)#vlan protocol group remove 2
Layer 2 Switching Commands
830
Advertisement
Table of Contents
