Dell N1100-ON Reference Manual page 212

Command
show banner
show buffers
show checkpoint
statistics
show cut-through mode
show hardware profile
show idprom interface
show interfaces
show interfaces
advanced firmware
show interfaces
show interfaces
utilization
show memory cpu
show nsf
show power-usage-
history
show process app-list
show process app-
resource-list
show process cpu
show process proc-list
show sessions
Description
Displays banner information.
Displays the system allocated buffers.
Displays the statistics for the checkpointing
process.
Show the cut-through mode on the switch.
Displays the hardware profile information for
the 40G ports.
Displays the optics EEPRM contents in a user-
readable format.
Displays the traffic statistics for one or multiple
interfaces.
Displays the firmware revision of the PHY for a
port.
Displays the static and dynamic parameters for
the optics.
Displays the interface utilization.
Checks the total and available RAM space on
the switch.
Shows non-stop forwarding status.
Shows the history of unit power consumption
for the unit specified in the command and total
stack power consumption.
Displays the system applications.
Lists the configured and in-use resources for
each application known to the Process Manager.
Checks the CPU utilization for each process
currently running on the switch.
Lists the configured and in-use resources for
each application known to the Process Manager.
Displays a list of the open console sessions.
Dell EMC Networking CLI
a
Mode
PE
UE or PE
PE
PE
PE
UE or PE
UE
PE
UE or PE
PE
PE
PE
PE
PE or GC
PE or GC
PE
PE or GC
PE
212