Dell N1100-ON Reference Manual page 154

Command
show lldp dcbx
classofservice traffic-class-
group
traffic-class-group max-
bandwidth
traffic-class-group min-
bandwidth
traffic-class-group strict
traffic-class-group weight
show classofservice traffic-
class-group
show interfaces traffic
show interfaces traffic-class-
group
a. For the meaning of each Mode abbreviation, see
OpenFlow
Command
controller
hardware profile openflow
ipv4 address
mode
Description
Displays the Traffic Class to Traffic Class Group
mapping.
Maps the internal Traffic Class to an internal
Traffic Class Group (TCG).
Specifies the maximum transmission
bandwidth limit for each TCG as a percentage
of the interface rate.
Specifies the minimum transmission bandwidth
guaranteed for each TCG before processing
frames from other TCGs on an interface.
Activates the strict priority scheduler mode for
each specified TCG.
Specifies the scheduling weight for each TCG. GC or
Displays the Traffic Class to Traffic Class Group
mapping.
Displays traffic information.
Displays the Traffic Class to Traffic Class Group
mapping.
Mode
Description
Configures a connection to an OpenFlow
controller
Selects the forwarding mode for the OpenFlow
hybrid capability.
Assigns the IPv4 source address utilized for
controller connections.
Configures the selection of interfaces used to
assign the IP address utilized for controller
connections.
Types.
Dell EMC Networking CLI
a
Mode
PE
GC or
IC
GC or
IC
GC or
IC
GC or
IC
IC
PE
PE
PE
a
Mode
OFC
GC
OFC
OFC
154