Table of Contents
Advertisement
Syntax
show ip verify source [interface interface-id]
•
interface-id: A valid physical interface identifier or port-channel identifier
Default Configuration
There is no default configuration for this command.
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
console#show ip verify source interface gigabitethernet 1/0/1
Interface
Filter Type
IP Address
MAC Address
Vlan
----------- ----------- --------------- ----------------- -----
Gi1/0/1
ip
1.2.3.4
00:12:32:43:54:66
1
show ip source binding
Use the show ip source binding command to display all bindings (static and
dynamic).
Syntax
show ip source binding
Default Configuration
There is no default configuration for this command.
Command Mode
User Exec, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
532
Layer 2 Switching Commands
Advertisement
Table of Contents
