Default Configuration
There is no default configuration for this command.
Command Modes
User Exec, Privileged Exec (all show modes)
User Guidelines
The filter type is one of the following values:
•
ipv6-mac: User has configure MAC address filtering on this interface
•
ipv6: IPv6 address filtering is configured on this interface
•
N/A: No filtering is configured on the interface
Example
console(config-if-Gi1/0/5)#show ipv6 verify
Interface
Filter Type
-----------
-----------
Gi1/0/1
ipv6
Gi1/0/2
ipv6-mac
Gi1/0/3
N/A
Gi1/0/4
N/A
Gi1/0/5
ipv6-mac
Gi1/0/6
N/A
Gi1/0/7
N/A
Gi1/0/8
N/A
Gi1/0/9
N/A
console(config-if-Gi1/0/5)#show ipv6 verify interface gi1/0/5
Interface
Filter Type
-----------
-----------
Gi1/0/5
ipv6-mac
show ipv6 verify source
Use the show ipv6 verify source command to display the IPv6 Source Guard
configurations on all ports.
Layer 2 Switching Commands
369