Ip Ssh Pubkey-Auth - Dell N1100-ON Reference Manual

Example
The following example specifies the port to be used by the SSH server as
8080.
console(config)#ip ssh port 8080

ip ssh pubkey-auth

Use the ip ssh pubkey-auth command in Global Configuration mode to
enable public key authentication for incoming SSH sessions. To disable this
function, use the no form of this command.
Syntax
ip ssh pubkey-auth
no ip ssh pubkey-auth
Default Configuration
The function is disabled.
Command Mode
Global Configuration mode
User Guidelines
Public key authentication allow administrators with an SSH client access to
the switch without requiring a password. Use the crypto key pubkey-chain ssh
user-key command to configure the administrators public key for use by the
SSH server. AAA authentication is independent from this configuration.
Example
The following example enables public key authentication for incoming SSH
sessions.
console(config)#ip ssh pubkey-auth
1069
Security Commands