Port - Dell N1100-ON Reference Manual

port

Use this command to set the port on which to listen for CoA and disconnect
requests from authorized dynamic RADIUS clients.
Syntax
port port–number
no port
• port-number—An integer in the range of 1025–65535
Default Configuration
The default is port 3799.
Command Modes
Dynamic Radius Configuration
User Guidelines
Only one port may be defined and it is used to all RADIUS clients. Do not use
a port number reserved for use by the switch. UDP, TCP and RAW Ports
reserved by the switch and unavailable for use or configuration are:
Ports 1, 17, 58, 255, 546, 547, 2222, 4567, 6343, 49160
Command History
Introduced in version 6.2.0.1 firmware.
Example
console(config-radius-da)# port 1700
server-key
Use this command to configure a global shared secret that is used for all
dynamic RADIUS clients that do not have an individual shared secret
configured. Use the no form of the command to remove the global shared
secret configuration.
973
Security Commands