Commands In This Section - Dell N1100-ON Reference Manual

Commands in this Section

This section explains the following commands:
ip access-list
deny | permit (IP ACL)
deny | permit (Mac-Access-List-
Configuration)
ip access-group
mac access-group
mac access-list extended
ip access-list
Use the ip access-list command in Global Configuration mode to create an
Access Control List (ACL) that is identified by the parameter list-name and
to enter IPv4-Access-List configuration mode. If parameterized with the
name of an existing access list, additional match clauses are added to the end
of the access list.
ip access-list list-name [extended]
no ip access-list list-name
• —Access-list name up to 31 characters in length.
list-name
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Access lists use the extended access list format. Multiple permit and deny
clauses and actions may be specified without requiring the access list name to
be entered each time. Permit and deny clauses are entered in order from the
first match clause when in Access List Configuration mode.
mac access-list extended rename
remark
service-acl input
show service-acl interface
show ip access-lists
show mac access-lists
Layer 2 Switching Commands
263