Dell N1100-ON Reference Manual page 157

Command
ipv6 ospf bfd
neighbor fall-over bfd
show bfd neighbor
a. For the meaning of each Mode abbreviation, see
BGP
Command
router bgp
address-family
address-family ipv4 vrf
address-family ipv6
aggregate-address
bgp aggregate-different-
meds (BGP Router
Configuration)
bgp aggregate-different-
meds (IPv6 Address Family
Configuration)
bgp always-compare-med
bgp client-to-client
reflection (BGP Router
Configuration)
bgp client-to-client
reflection (IPv6 Address
Family Configuration)
Description
Enables sending of BFD events to OSPF on a
VLAN routing interface.
Enables BFD support for a BGP neighbor.
Displays the neighbors for which BFD has
established adjacencies.
Mode
Description
Enables BGP and identify the autonomous
system (AS) number for the router.
Configures policy parameters within a peer
template to be applied to a specific address
family
Specifies IPv6 configuration parameters.
Configures a summary address for BGP.
Controls the aggregation of routes with
different multi-exit discriminator (MED)
attributes.
Allows IPv6 routes with different MEDs to be
aggregated.
Compares MED values during the decision
process in paths received from different
autonomous systems.
Enables client-to-client reflection.
Enables client-to-client reflection.
Types.
Dell EMC Networking CLI
a
Mode
IC
RBC
PE or
GC
a
Mode
GC
PTC
BR
BR or
IPAF
BR
IPAF
BR
IPAF
BR
IPAF
157