Dell N1100-ON Reference Manual page 237

Table 2-5. Navigating CLI Command Modes (continued)
Command Mode
IPv6 Address
Family
Configuration
Management
Access-List
Policy-Class-Map From Global
Class-Map
Access Method
From BGP Router
Configuration
mode, use the
address-family ipv6
command.
From Global
Configuration
mode, use the
management
access-list
command.
Configuration
mode, use the
policy-map class
command.
From Global
Configuration
mode, use the class-
map command.
Command Prompt
console (config-router-af)#
console(config-macal)#
console(config-policy-map)#
console(config-classmap)#
Exit or Access
Previous Mode
To exit to BGP
Router
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
Exec mode.
Using the CLI
237