Syntax
show captive-portal user [user-id]
•
user-id — User ID (Range: 1–128).
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal user
User ID
User Name
------- --------------------- ------- ------------ ------------
1
user123
2
user234
console#show captive-portal user 1
User ID........................................ 1
User Name...................................... user123
Password Configured............................ Yes
Session Timeout................................ 0
Group ID
-------- --------------------------------
1
Default
2
group2
user group
Use the user group command to associate a group with a captive portal user.
Use the "no" form of this command to disassociate a group and user. A user
must be associated with at least one group so the last group cannot be
disassociated.
Session
Timeout
14400
0
Group Name
Group ID
Group Name
1
Default
1
Default
2
group2
Security Commands
1011