Voice Vlan - Dell N1100-ON Reference Manual

Command
switchport mode private-
vlan
switchport mode dot1q-
tunnel
switchport private-vlan
switchport trunk
switchport trunk
encapsulation dot1q
vlan
vlan association mac
vlan association subnet
vlan makestatic
vlan protocol group
vlan protocol group add
protocol
vlan protocol group name
vlan protocol group remove
a. For the meaning of each Mode abbreviation, see

Voice VLAN

Command
voice vlan
voice vlan (Interface)
Description
Defines a private VLAN association for an
isolated or community interface or a mapping
for a promiscuous interface.
Enables QinQ tunneling on customer edge
(CE) interfaces.
Defines a private VLAN association for an
isolated or community port or a mapping for a
promiscuous port.
Adds or removes VLANs from a trunk port.
Use this command for compatibility. This
command performs no action.
Configures a VLAN.
Associates a MAC address to a VLAN.
Associates an IP subnet to a VLAN.
Changes a GVRP dynamically created VLAN to
a static VLAN.
Adds protocol-based VLAN groups to the
system.
Adds a protocol to the protocol-based VLAN
identified by groupid.
Adds a group name to the protocol-based VLAN
identified by groupid.
Removes the protocol-base VLAN group
identified by groupid.
Mode
Description
Enables the voice VLAN capability on the
switch.
Enables the voice VLAN capability on the
interface.
Types.
Dell EMC Networking CLI
a
Mode
IC
IC
IC
IC
IC or
IR
GC
VC
VC
GC
GC
GC
GC
GC
a
Mode
GG
IC
134