Dell N1100-ON Reference Manual page 213

Command
show slot
show supported cardtype
show supported
switchtype
show switch
show system
show system fan
show system id
show system power
show system
temperature
show tech-support
show users
show version
stack
stack-port
stack-port shutdown
standby
switch renumber
telnet
traceroute
Description
Displays information about all the slots in the
system or for a specific slot.
Displays information about all card types
supported in the system.
Displays information about all supported switch
types.
Displays information about the switch status.
Displays system information.
Explicitly displays the fan status.
Displays the service ID information.
Displays information about the system level
power consumption.
Displays information about the system
temperature and fan status.
Displays system and configuration information
(for debugging/calls to technical support).
Displays information about the active users,
including which profiles have been assigned to
local user accounts and which profiles are active
for logged-in users.
Displays the system version information.
Sets the mode to Stack Configuration mode.
Sets the mode to Stack Configuration mode to
configure Stack ports as either Stacking ports or
as Ethernet ports.
Enables or disable the stack port
administratively.
Configures the standby in the stack.
Changes the identifier for a switch in the stack. GC
Logs into a host that supports Telnet.
Discovers the IP routes that packets actually
take when traveling to their destinations.
Dell EMC Networking CLI
a
Mode
UE
UE
UE
UE
UE
UE or PE
UE
UE or PE
UE or PE
PE
PE
UE
GC
GC
SC
SG
PE
PE
213