Show Captive-Portal Configuration Client Status - Dell N1100-ON Reference Manual

Command Mode
Privileged Exec mode, Global Configuration mode and all Configuration
submodes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal client status
Client MAC Address Client IP Address Protocol Verification Session Time
------------------ ----------------- -------- ------------ ------------
0002.BC00.1290
0002.BC00.1291
0002.BC00.1292
console#show captive-portal client 0002.BC00.1290 status
Client MAC Address........................ 0002.BC00.1290
Client IP Address......................... 10.254.96.47
Protocol Mode............................. https
Verification Mode......................... Local
CP ID..................................... 1
CP Name................................... cp1
Interface................................. Gi1/0/1
Interface Description..................... Unit: 1 Slot: 0 Port: 1 Gigabit -
Level
User Name................................. user123
Session Time.............................. 0d:00:00:13

show captive-portal configuration client status

Use the show captive-portal configuration client status command to display
the clients authenticated to all captive portal configurations or a to specific
configuration.
Syntax
show captive-portal configuration [ cp-id ] client status
• cp-id — Captive Portal ID.
Default Configuration
There is no default configuration for this command.
10.254.96.47
10.254.96.48
10.254.96.49
https Local
https Local
https Radius
Security Commands
0d:00:01:20
0d:00:05:20
0d:00:00:20
1006