Table of Contents
Advertisement
•
encrypted—Encrypted password entered, copied from another switch
configuration. Password strength checking is not applied to the encrypted
string.
Default Configuration
The default privilege level is 1.
Command Mode
Global Configuration mode
User Guidelines
To use the ! character as part of the username or password string, it should be
enclosed within quotation marks. For example, username "test!xyz" password
"test!xyz" includes an exclamation point in both the username and password.
Up to 8 users may be created. If the password strength feature is enabled, it
checks for password strength and returns an appropriate error if it fails to
meet the password strength criteria. If the encrypted keyword is entered, no
password strength checking is performed as the password is encrypted and the
system does not have the capability of decrypting the password. Privilege level
0 is restricted from using Privileged Exec or any Configuration level
commands. There is effectively no difference between Privilege level 1 and 15.
The following table lists the completion messages.
Message Type
Successful Completion Message
Error Completion Message
Message Description
No message is displayed.
Could not set user password!
Security Commands
880
Advertisement
Table of Contents
